EXTRA 5% OFF SUMMER SALE*
USE CODE 'SUM5' IN THE SHOPPING CART TO APPLY YOUR DISCOUNT
OFFER RUNS UNTIL 1st SEPTEMBER 2026
*Minimum spend £100, online orders only
ELLSI REPLACEMENT 2.4L HOT WATER/BOILER TANK, PDT-000215
ELLSI REPLACEMENT 2.4L HOT WATER/BOILER TANK, PDT-000215
STATE OF THE ART TANK:
The secret to the success of the system is in the unassuming innovative boiler tank unit which discreetly slips away under your sink unit to do all the hard work. The compact stainless-steel tank is not under mains pressure, so the system is unvented and therefore no excess water is discharged to drain. The inner tank has several electrical safety features. A temperature sensor to give an accurate digital external reading of the current water temperature. A float sensor detecting the water level in the tank, this avoids dry start that would damage the boiler. An overheat stat to ensure the unit never overcooks.
FEATURES:
- The inner tank is fully insulated and energy efficient helping to maintain the tank temperature.
- Brushed stainless steel surround complimented with a smoked glass top that incorporates digital touch control and functional colour display.
- Compact in design to fit discreetly into your base unit (Overall height 330mm, Width 230mm, Depth 210mm).
- Temperature adjustable from 75 - 98°C
SPECIFICATION:
- Tank capacity: 2.4 Ltrs
- Rated Input: 1.5kw
- Rated Voltage: 220-240V ac, 50HZ
- Standby Power: 2.2w
- IPX Classification: IPX4
- Static Bar Pressure: 1Bar
- Dynamic Bar Pressure: 1.5 to 5Bar
- Optimum working pressure: 1Bar Minimum to 3Bar Maximum
- Plug Type: Fused 13A 3 Pin Plug
- Power Cord Length (mm): 910
- Function type: Touch screen digital interactive control
- Temperature Control: 75°C to 98°C
- Guarantee: 2 years - if fitted to an existing Ellsi Hot Water Tap or those listed below (proof required if making a claim). The tank might not be compatible with other brands making the guarantee null & void.
- Height (mm): 330
- Width (mm): 230
- Length/Depth (mm): 210
INSTALLATION:
Isolate & remove existing tap. Install & connect new Tri flow tap, connect hoses from tap to tank (cold tap to tank supply via filter). Prime the tank & check water connections (as per supplied instructions) then plug in the tank & you’re ready to go. The instant boiler tap when purchased as a 3 in 1/4 in 1 Kit comes complete with an easy to replace carbon filter (not included with the Hot Water Tank). The filter comes complete with fixtures and fittings and when ready for replacing it takes seconds: just a quick twist, pull & replace.
If you're replacing an older model where the filter has changed, you will require the Replacement Filter Kit with Wall Bracket PDT-000052 so you can use the current model of filters PDT-000053.
TO SUIT THE FOLLOWING BRANDS (only where the same Tank has been previously used):
- Ellsi
- Impromta
- Ceki
- Etal
- Hanstrom
- Harmoni
- Bower Palma
- Wodar
- Liquida
- Vesta
EVO REPLACEMENT 2.4L HOT WATER/BOILER TANK for VENTED Hot Water Taps, BWT270
EVO REPLACEMENT 4L HOT WATER/BOILER TANK for VENTED Hot Water Taps, BWT280
GUARANTEE CLAIM:
The HOT WATER TANK is always hot, meaning this increases the possibility for the limescale to form on the inside of the Tank & Heating Element. Failing to regularly change your hot water tank filter may not only invalidate your warranty but may also damage or cause the tank to stop working. Scaling up will reduce the flow & water taste.
We require PROOF of PURCHASE of the replacement filters if you have any issues after 6 months of the purchase date. Please have this at hand before getting in touch or the guarantee could be VOID.
